施工组织设计下载简介
内容预览随机截取了部分，仅供参考，下载文档齐全完整
江都建设项目施工方案Ref datasheet
Conductive Layer
Trowel, spike roller
further scrape and grind the floor to eliminate substrate defects and achieve a smooth surface.
DB31／T 329.9-2018标准下载用滚筒或刮板施工高性能无溶剂环氧底漆
。进一步对地面进行找补和打磨，以消除
基层缺陷，并提供一个光滑的受漆面。
Scrape layer
quartz sand, this operation will be finished in several times.
和石英砂配制的环氧砂浆批补地面，这一般要分好几次完成。
them to earthing point or steel column via earthing plate.
将自粘式导电铜箔以至少
的间距粘贴在批补层上，然后通过导电片将其同接地点或
Conductive layer
滚筒施工水性导电层材料
roll immediately in two directions with a spiked roller to remove entrapped air.
底漆固化后，进一步对地面进行打磨处理，然后使用锯齿刮板施工无溶剂自流平材料
石英砂，并随即用消泡滚筒消除气泡。
Normally 2 days for foot traffic, 7 days for full service.
Wall/ceiling epoxy coating
Structure Profile:
Wall/ceiling
Finish coat
Waterproof layer
SikaTop Seal 107
System Description:
材料的详细技术数据及施工细节参见所附说明书
Process Description:
1. Substrate preparation
After general cleaning of substrate, grind the whole surface carefully and then clean again.
先对基层进行一般性清理，然后对整个基面进行仔细打磨，再将灰尘清理干净。
3. First coat
刮涂施工首道面层环氧材料
，固化后进行轻微打磨。
GB 51325-2018-T：煤焦化粗苯加工工程设计标准（无水印，带书签） Finish coat
Product & Consumption
Application Method
Substrate preparation
Cleaning and grinding
Waterproof layer
金属非金属矿山安全规程GB16423-2020.pdfFinish coat
AnyBizSoft PDF to Word
要转换全部文档，免费获取注册码请访问