SY／T 5190-2016标准规范下载简介
SY／T 5190-2016 石油综合录井仪技术条件SY/T 51902016
5.12Well depth measurement parameterstest 5.13Engineering and drilling fluids parameters test 5.14 Geological analysis parameters test . 5.15 Signal interface system test 5.16 Computer system test ·32 Rules of inspection .33 6.1 Delivery inspection .33 6.2 Type inspection .·33 6.3 Criterion rules. Marking, packaging, transport and storage *34 7.1 Product marking · 34 7.2 Packaging 7.3 Transport 54
CECS 558-2018-T 建筑工业化内装工程技术规程SY/T51902016
2Normativereferences
SY/T51902016
pressurization GB12955—2008Fireresistantdoorsets GB/T13384Generaltechnical requirements packaging of mechanical and electronic products
Compositionandclassificat
Composition and classi
3.2Unit classification
Requirements
Unit environmental con
4.2Vibration conditio
Instrumentpower supply,signal acquisition,gas processing and gas analysis unit do vibration test
SY/T 51902016
a)Frequencyrange：10Hz~50Hz b)Peakvalueacceleration:50m/s2. c) Time : 10min
43Shock condition
Instrumentpowersupply，signal acquisition,gas processing and gas analysis unit do vibration test a)Pulsewaveform:Halfsinewave. b)Duration : 11ms. c) Peak value acceleration : 50m/s?
4.4Noising condition
Noising shall heless than 60dBwithin the working area of the unit.
.5Powerrequirement
4.6Insulationreguirements
The insulation condition includes: a)Undertheworking condition,theresistance between the entire machine circuit and the unit shell shallbemorethan20MQ[500V(DC)]. b)Theunit shallhave the overload power failure protection.
4.7Cabin configuration
asfollow a) The cabin outer shell shall adopt steel structure. The cabin shall be provided with facilities to guarantee themain instrument from impact and
4.8.1Cabin's requirements
4.8.2Airpressureinthe cabin
Pressure withinthe cabin shall bekept at 50Pa 150Pa above atmosphere.If the inside and outside airpressuredifferencedecreasestobelow50Pa, alarmwillturnonandlastfor1min,following withthe automaticallyturned off of themain power.
4.8.3Flammablegasdetection
DetectionscopeshallcoverO 100%ofthe explosion lower limit,with theprecision of±2% Whenflammablegasdensityreachestherange20%~ 50%oftheexplosionlowerlimit,alarmsystem works.While as it raises tovalues above50%of the explosion lowerlimit,thehost power and airblower powerwillbeturnedoff automatically
4.8.4Smoke detection
When the faint gray smoke reaches 2.4% per meter, the host power and airblower power will be turned offautomatically
.8.5Emergency lights
The unit shall be equipped with the emergency lights. The emergency lighting system shall turn to emergency work condition automatically in 5s after the power supplywas shut off,and can work continuously no less than 20min when charged enough.
The unit shall be equipped with the emergency devices to shut off all the power supplymanually, with a lack function after the shutting off.
4.9Continuous running time
The whole unit shall be able to run continuously ess than 300h
4.10Gas analysis parameters
4.10.1Total natural gas detector
SY/T 51902016
4.11.1Depth Measurement parameters are as follow : a）Measurementrange：（0~9999.99）m b）Accuracy：±1cm/10m 4.11.2ROP Measurementrange：（0.10~999.99）min/m 4.11.3Hook height sensor Measurement parameters areas follow : a)Measurementrange:(0~50)m. b）Accuracy：±lcm/10m. 4.12 Engineering, drilling fluids parameters System parameters are shown in Table 1. 4.13Geology analysis parameters 4.13.1 Carbonatecontentdetector
Measurementparameters are as follow a)Measurementrange:0~100%. b) Accuracy : Full scale 2%
SY/T 51902016
Table1Engireeringand drillingfluidparameters
.132Shale densimeter
a）Measurementrange：（2.152.85）g/cm） b)Resolution:0.01g/cm3
sareasfollow: a）Wavelength:（350~365）nm b) Power : > 4w
4.14Signal interface system
4.15Computersystem
4.15Computersystem
4.15.2Computersystem software
4.15.3Dataacquisition software
4.15.4Dataprocessing software
4.15.5Databaseapplicationsoftware
SY/T 51902016
quickly ; d)The open database structure and the WITs interface shall be able to exchange data with other well site devices in ASCIl or LAS form.
4.15.6Dataoutput system
Dataoutputrequirements a)The system can provide the flexiblegraph and data format editiontool,and customize document, database and so on. b)Thesystemcanextractdatafromdifferent database,and customize colored plots with logging information,such asmaster log,gas evaluationplot,pressureevaluationplot,etc, and various data format. It can also output data from theprinter,plotter,document,database andsoon
Test methods
5.1Test equipment and guide sample
SY/T 51902016
5.2Environmentcondition
All test should be in 4.I prescribed conditions
5.3Vibration test
According to GB/T 2423.10 method for vibration test： a)Beforethetest,inspectionequipment performance. b)Instrument in no packingconditions fixed in thevibration on the stage,press 4.2 choosetest conditions, vibration test. c)After the test,usethetest systemfor thetest, instrument can work normally
5.4Impact test
AccordingtoGB/T2423.5—2008methodfor impacttest: a)Beforethe test,inspectionequipment performance; b)Instrument in no packing conditions fixed in impact device, choose test conditions by 4.3, impacttest. c)Afterthetest,usethetest systemforthetest. instrument can work normally
55 Nnise fesi
5.6Power test
5.7Insulation test
Test methods are as follow : a)By megohmmeter check the power circuit of enclosure of electrical insulation, the results should be conformed to the requirements in 4.6 a). b)According to theinstrumentrating,add joint load. When exceed the specified load, should cut off electricity automatically, and the results shall be conformed to the requirement in 4.6b)
Test methods are as follow : a)By megohmmeter check the power circuit of enclosure of electrical insulation, the results should be conformed to the requirements in 4.6 a). b)Accordingto the instrumentrating,add joint load. When exceed the specified load, should cut off electricity automatically, and the results shall be conformed to the requirement in 4.6 b)
5.8Cabin structurerequirements test
Test methods are as follow : a)Instrumentinthetertiarypavementorequivalent to earth road, gravel road under the condition of turbulencetest:at4okm/h,strokenot less than 60 km. After the test,the test system for its testing,instrument can work normally,the results should be conformed to the requirements in 4.7 a) . b)With visual method inspection equipment room outer and instrument host,the result should be conformed to the requirements in 4.7b). c)Thedetectionreportof rigging equipments should be conformed to the requirements in 4.7c)
Test methods are as follow : a)Instrumentinthetertiarypavementorequivalent to earth road, gravel road under the condition ofturbulencetest:at4okm/h.strokenotless than 60 km. After the test, the test system for its testing,instrument can work normally,the results should be conformed to the requirements in 4.7 a) . b)Withvisual method inspection equipmentroom outer and instrument host, the result should be conformed to the requirements in 4.7b). )Thedetectionreportofriggingequipments should be conformed to the requirements in 4.7c)
Inspectthecabinaccordingtotherequirements in GB3836.1,GB3836.5,GB3836.17,GB12955. The result should be conformedto the requirements in4.8.1
5.9.2Positivepressurecontrol test
Closethewindowsand thedoors,turnon themain power, and start the air blower.The main power shall be turned on only if the indoor and outdoor airpressure difference reaches predetermined value 150Pa.Then open the doors or shut down the airblowerto decreasethe indoor andoutdoor air pressure difference topredetermined value50Pa, the result shall be conformed to the requirements in 4.8.2.
5.9.3Flammablegas safety test
Connect the flammable gas detector head and the device containing standard flammable gas sample, furn on the standard gas valve,check the correctness of the sensor's display and set the explosion lower limitvalue.Dischargetheflammablegasnear the sensorhead,the result shall be conformed to the requirements in4.8.3when theflammablegas density achieves the predetermined value
5.9.4Smoke safetytest
In the smoke detector sensor probetest range, casting smokeaccordingto the standard requirements of the smoke,the results should be conformed to the requirements of the 4.8.4.
For emergency lighting devicebattery charging tothesaturation state,shutoffthemainpower supply,recording emergency lighting in shut off the main power supplymuch time can be transferred to emergency work state and continuous lighting time, the results shall be conformed to the requirements in 4.8.5.
5.9.6Emergencysafetytest
Pressdowntheemergencyswitchmanually and carry out the test under the normal working condition. The test result shall be conformed to the requirements in 4.8.6.
SY/T51902016
5.11 Gas analysis test
5.11.1Natural gas total analysis test
SY/T51902016
Input the mixed gas sample of 1% density of methane and 1%density of ethane.Record the voltagevalueA at twopeaks intersection point of methane and ethane aswell as thepeak voltage B of ethane.The separation degree R can becalculated accordingtoFormula (3)，the result shall be conformed to the requirements in 4.10.2d)
SY/T 51902016
5.11.4H,S test
5.11.3CO,test
5.12Welldepthmeasurementparameters
Check the readings using the signal from the winch sensortest instrument,and the results shall be conformed to the requirements in 4.11.1 and 4.11.2.
Check thehook height using the signal from the winch sensor test instrument,and the results shall be conformed to the requirements in 4.11.3.
5.13.1Pumpstrokesrateandrotarytablesp
Check the pump stroke times and rotary speed value using the signal from the Pump impact and rotary speedsensortestinstrument,andtheresultsshallbe conformed to the requirements in Table 1
5.13.2Rotary table torque test
Test methods are as follow : a)Pressuretransfermethod:applyaconstant pressuretothepressuresensorbythepiston pressure meter, convert this pressure to the
SY/T 51902016
engineering value, then check its corresponding value,the result shall be conformed to the requirements in Table 1. )Electricity torque transfer method:implement test witha simulator, convert the currentto the engineering value,then check its corresponding value. The result shall 6e conformed to the reauirements in Table I.
engineering value, then check its corresponding value,the result shall be conformed to the requirements in Table 1. )Electricity torque transfer method:implement test with a simulator, convert the current to the engineering value,then check its corresponding value. The result shall 6e conformed to the requirements in Table 1.
5.13.3Standpipepressure,casingpressureand hookload test
5.13.3Standpipepressure,casingpressureand
Apply a constant pressure to the pressure senso bythepistonpressuremeter,convertthepressure to the engineering value,and the result shall be conformed to the requirements in Table .
5.13.4Drilling fluids level test
Placeasensorontheplanparalleltothetesting surface,theerrorbetweenthemeasureddistance and the standardized one should he conformed to the reauirements in Table l.
5.13.5Drilling fluids temperature test
Put the temperature sensor into the heater, and set different temperature respectively. The reading value and the standardized one shallhe conformed to the requirements inTable1.
5.13.6Drilling fluids density test
Put the sensor into a kind of solution with known density, the reading value shall he conformed to the requirementinTable
5.13.7Drillingfluidsconductivitytest
Measure the conductivity inseveralkinds ofNaC solutions with different conductivity through using the standardized conductive meterand conductive sensor simultaneously.The readingvalues shall he conformed to therequirements inTable1.
5.13.8Drilling fluids flow out test
The movementrange of the flow sensor's baffle 32
shall be conformed to the requirements in TableT
5.14Geological analysis parameters test
5.14.1Carbonate measurer test
5.14.2Shale densimeter test
Put it into the shale with:known density,the reading value should shallbe conformed to the requirements in 4.13.2.
5.14.3Fluorescenceanalyzertest
There shall he no fluorescence reflected when it is tested with the nonfluorescence samplewhile there shallbefluorescencewhentestedwiththeknown fluorescence sample,theresult shouldhe conformed to the requirements in 4.13.3.
There shall he no fluorescence reflected when it is tested with the nonfluorescence sample while there shallbefluorescencewhentestedwiththeknown fluorescencesample,theresult shouldhe conformed to the requirements in 4.13.3
5.15Signal interface system test
Connectthesensorandinterfacesystemcheck param resules should be consistent with 4.14
5.16Computersystemtest
5.16.1Computerhardwaretest
.16.2Computersystemsoftwaretest
6Rulesof inspection
6.1Deliveryinspection
Each set of theunits shall heinspected before
SY/T 51902016
leaving the factory.Only the units that have passed all related delivery inspection are qualified to lease thefactory. The items of delivery inspection arc listed in Table 2.
Table2Theitems of Instrumentinspection
6.2Type inspection
6.2.1Typeinspection condition
Type inspection shall be carried out in any of the followingsituations: a)Whenperformanceof theinstrumentisaffected by substantial changes in structure, technology and material,after the instrument is formally put into production. b)Periodic inspection shallbe carried out after50 sets have been accumulatively produced. )Whengreatdifferencesexistbetweentheresults of the delivery inspection and the previous type inspection. d)Whentypeinspectionis requestedbythe State Department of Quality and Technical
Type inspection shall be carried out in any of the following situations : a)Whenperformanceof the instrument isaffected by substantial changes in structure, technology and material,after the instrument is formally putintoproduction. b)Periodic inspection shall be carried out after50 sets have been accumulatively produced. c)Whengreatdifferencesexistbetweentheresults of the delivery inspection and the previous type inspection. d)When type inspection is requested bythe State Department of Quality andTechnical
Supervision
Supervision
6.2.2Itemsandrequirementsoftypeinspectic
Items and requirements of type inspection are showr linTable2,
6.2.3Randomsamplingofthetypeinspection
6.3Criterionrules
SY/T 51902016
6.3.2Type inspection
JGJ／T 40-2019 疗养院建筑设计标准Marking,packaging,transport and storage
7.2Packaging
7.2.1Packaging shallbeconformed to general
7.2.1Packaging shall be conformed togeneral specificationsforpackingof mechanical and electrical product in GB/T 13384
.2.1Packagingshallbeconformedtogener specificationsforpackingof mechanicalan electricalproduct inGB/T13384
73Transport
7.3.1Theproducts shallbefittovarious transportationmeans. 7.3.2During the transport,the products shall bekeptfromdamp,fiercevibration,shock, inversion and roll over. 7.3.3Theproductsshallnotbe transported togetherwiththeexplosive,flammableand corrosiveobjects.
SL 34-2013 水文站网规划技术导则7.4.1The products shall be stored in the dry, ventilated warehouse where there.is no harmful gas. 7.4.2Theproducts shall be checked every six months. 7.4.3The products shall be regularly cleaned and protectedfromtheerosionofrain,snowandsand.